LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Sienna LE, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (3MZ-FE) >> EFI Relay >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT EFI RELAY 
    1. Continuity inspection.
      1. Using an ohmmeter, check for continuity between each terminal.
        EFI RELAY

        Between terminal Specified condition
        1 - 2 Continuity
        3 - 5 No continuity
        Continuity
        (Voltage applied terminals 1 and 2)
        Fig 1: Inspecting EFI Relay
        G04493881Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals