Transmission Drive Sprocket: Reassembly

INSTALL TRANSMISSION DRIVE SPROCKET SUB-ASSEMBLY
1. Apply ATF WS to the sliding surfaces of the bearing and install the needle roller bearing to the transmission drive sprocket.
2. Install the spacer to the transmission drive sprocket.
  
  Fig 1: Installing Spacer And Needle Roller Bearing To Transmission Drive Sprocket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a thin screwdriver, install the snap ring to the transmission drive sprocket.
  
  Fig 2: Installing Snap Ring To Transmission Drive Sprocket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002