LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Prius >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Lighting) >> Personal Light Assembly >> Inspection

Personal Light Assembly: Inspection

WARNING: This page is about a different car, the 2006 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PERSONAL LIGHT ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      STANDARD RESISTANCE (1 OF 2)

      Tester connection Switch operation Specified resistance
      1 - 3 OFF 10 kΩ or higher
    2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the illumination comes on when switch operation is ON position.
      Fig 1: Identifying (M3) Personal Light Assembly Connector Terminals
      G04466467Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT PERSONAL LIGHT ASSEMBLY (ELECTRO CHROMIC MIRROR INNER MIRROR) 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      STANDARD RESISTANCE (2 OF 2)

      Tester connection Switch operation Specified resistance
      1 - 6 OFF 10 kΩ or higher
    2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 6, then check that the illumination comes on when switch operation is ON position.
      Fig 2: Identifying (I13) Personal Light Assembly (Electro Chromic Mirror Inner Mirror) Connector Terminals
      G04466468Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals