Combination Meter: Removal

WARNING: This page is about a different car, the 2006 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE METER HOOD SUB-ASSEMBLY (See REMOVAL )
REMOVE COMBINATION METER ASSEMBLY
1. Remove the screw.
2. Disengage the 2 claws as shown in Fig 1 .
  
  Fig 1: Disengaging Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Disconnect connector, then remove the combination meter assembly, as shown in Fig 2 .
  
  Fig 2: Removing Combination Meter Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002