Counter Shaft: Disassembly

REMOVE UNDERDRIVE PLANETARY SUN GEAR SUB-ASSEMBLY
1. Remove the underdrive planetary sun gear subassembly from the counter shaft assembly.
  
  Fig 1: Removing Underdrive Planetary Sun Gear Subassembly From Counter Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE PLANETARY SUN GEAR HOLE SNAP RING
1. Using snap ring pliers, remove the underdrive planetary sun gear hole snap ring from the underdrive planetary sun gear sub-assembly.
  
  Fig 2: Removing Underdrive Planetary Sun Gear Hole Snap Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE PLANETARY GEAR HOLE SNAP RING
1. Using a screwdriver, remove the underdrive planetary gear hole snap ring from the counter shaft assembly.
  
  Fig 3: Removing Underdrive Planetary Gear Hole Snap Ring From Counter Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE PLANETARY GEAR ASSEMBLY
1. Remove the underdrive planetary gear assembly from the counter shaft assembly.
  
  Fig 4: Removing Underdrive Planetary Gear Assembly From Counter Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE INPUT SHAFT NEEDLE ROLLER BEARING
1. Remove the underdrive input shaft needle roller bearing from the counter shaft assembly.
REMOVE UNDERDRIVE INPUT SHAFT THRUST BEARING RACE
1. Remove the underdrive input shaft thrust bearing race from the counter shaft assembly.
INSPECT COUNTER SHAFT ASSEMBLY (See INSPECTION )

Fig 5: Removing Underdrive Input Shaft Thrust Bearing Race
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE INPUT SHAFT NUT
1. Using a chisel and hammer, unstake the underdrive input shaft nut.
  
  Fig 6: Unstaking Underdrive Input Shaft Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, remove the underdrive input shaft nut.
  SST 09350-32014 (09351-32170)
  
  Fig 7: Removing Underdrive Input Shaft Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE DIFFERENTIAL DRIVE PINION
1. Using SST, remove the differential drive pinion with output differential drive pinion, underdrive cylinder roller bearing and front drive pinion front tapered roller bearing.
  SST 09950-40011 (09951-04010, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
  
  Fig 8: Removing Differential Drive Pinion
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the front differential drive pinion bearing spacer from the counter shaft assembly.
  
  Fig 9: Removing Front Differential Drive Pinion Bearing Spacer From Counter Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UNDERDRIVE PLANETARY RING GEAR
1. Using a screwdriver, remove the snap ring from the counter shaft assembly.
  
  Fig 10: Removing Snap Ring From Counter Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the underdrive planetary ring gear from the counter shaft assembly.
  
  Fig 11: Removing Underdrive Planetary Ring Gear From Counter Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING
1. Using SST and a press, remove the front drive pinion rear tapered roller bearing from the counter shaft assembly.
  SST 09950-00020
  
  Fig 12: Removing Front Drive Pinion Rear Tapered Roller Bearing From Counter Shaft Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using a brass bar and hammer, tap out the front drive pinion rear tapered roller bearing outer race.
INSPECT UNDERDRIVE PLANETARY SUN GEAR SUB-ASSEMBLY (See INSPECTION )
INSPECT UNDERDRIVE PLANETARY GEAR ASSEMBLY (See INSPECTION )

Fig 13: Inspecting Underdrive Planetary Sun Gear Sub-Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002