Front Seat Inner Belt Assembly: Removal

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the RH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
   NOTE: Wait for 90 seconds after disconnecting the cable to prevent the airbag from deploying.
2. REMOVE SEAT TRACK BRACKET COVER OUTER RH 
3. REMOVE SEAT TRACK BRACKET COVER INNER RH 
4. REMOVE FRONT SEAT TRACK COVER RH REAR OUTER (See  REMOVAL  ) 
5. REMOVE FRONT SEAT TRACK COVER RH REAR INNER (See  REMOVAL  ) 
6. REMOVE FRONT SEAT HEADREST ASSEMBLY 
7. REMOVE FRONT SEAT ASSEMBLY RH 
8. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (See  REMOVAL  )