Data List/Active Test

HINT:

By accessing the DATA LIST displayed on the intelligent tester, you can perform such functions as reading the values of switches and sensors without removing any parts. Reading the DATA LIST as the first step in troubleshooting is one method to shorten labor time.

1. DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY 
   1. Connect the intelligent tester to the DLC3.
   2. Turn the ignition switch to the ON position.
   3. Following the display on the tester screen, read the "DATA LIST".
      DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY
      
      

      Item	Measurement Item/ Range (Display)	Normal Condition	Diagnostic Note
      D SEAT POSITION	Seat position (Driver side)/ FORWARD: Seat position is forward BKWARD: Seat position is backward FAIL: Failure detected	FORWARD/BKWARD	-
      PASSENGER CLASS	Passenger Classification/ NG: Data is not determined OFF: Vacant CHILD: Child (less than 36 kg (79.37 lb)) is seated AF05: Adult (36 to 54 kg (79.37 to 119.05 lb)) is seated AM50: Adult (more than 54 kg (119.05 lb)) is seated FAIL: A failure is detected	OFF/CHILD/AF05/AM50	-
      D BUCKLE SW	Buckle switch (Driver side)/ UNSET: The seat belt is not fastened SET: The seat belt is fastened NG: Data is not determined	UNSET/SET	-
      P BUCKLE SW	Buckle switch (Passenger side)/ UNSET: The seat belt is not fastened SET: The seat belt is fastened NG: Data is not determined	UNSET/SET	-
      DISPLAY TYPE	Display type identification information/ LR: The display is indicated by LH/RH DP: The display is indicated by Driver/Passenger	DP	-
      PAST CODES	Number of past trouble codes/ Min.: 0, Max.: 255	0	-