Back Door Lock: Inspection
- INSPECT BACK DOOR W/ MOTOR LOCK ASSEMBLY (BACK DOOR COURTESY SWITCH)
- Measure the resistance according to the value(s) in the table below.
Standard resistance
STANDARD RESISTANCETerminal No. Door Lock Latch Position Specified Condition 1 - 2 Open or half lock Below 1 Ω 1 - 2 Closed Below 1 Ω Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the result is not as specified, replace the door lock assembly.
- Measure the resistance according to the value(s) in the table below.
- INSPECT BACK DOOR LOCK ACTUATOR ASSEMBLY
- Apply battery voltage and inspect the back door lock actuator assembly operation, as shown in the illustration and table.
Standard voltage
MEASURING AND SPECIFIED CONDITIONSMeasuring condition Specified Condition Battery positive (+) --> Terminal 4
Battery negative (-) --> Terminal 3Lock Battery positive (+) --> Terminal 3
Battery negative (-) --> Terminal 4Unlock If the result is not as specified, replace the actuator.
- Apply battery voltage and inspect the back door lock actuator assembly operation, as shown in the illustration and table.