Active Height Control Pump And Motor: Inspection

INSPECT FLUID PRESSURE SENSOR
1. Start the engine and push the vehicle height select switch to select the "N" mode.
2. Measure voltage between terminals 2 and 3 of the fluid pressure sensor connector.
  Voltage:
  
  1.48 to 1.85 V
  
  Fig 1: Measuring Voltage Between Terminals 2 & 3 Of Fluid Pressure Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSPECT FLUID TEMPERATURE SENSOR
1. Disconnect the fluid temperature sensor connector.
2. Measure resistance between terminals 1 and 2 of fluid temperature sensor connector.
  Standard resistance:
  
  2.45 +/- 0.45 kΩ at 20°C (68°F)
  
  Fig 2: Measuring Resistance Between Terminals 1 & 2 Of Fluid Temperature Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002