LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Land Cruiser >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Transmitter Battery >> Installation

Transmitter Battery: Installation

  1. INSTALL TRANSMITTER BATTERY 
    1. Install a new battery (lithium battery) with the positive (+) side up as shown in Fig 1 .
      NOTE:
      • Be sure that the positive side and the negative side of the transmitter battery are matched correctly.
      • Be careful not to bend the terminals of the transmitter battery during installation.
      • Be careful that dust and oil do not come into contact with the transmitter case.
      Fig 1: Installing Transmitter Battery
      G04438603Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the transmitter cover.
  2. INSTALL DOOR CONTROL TRANSMITTER MODULE SUB-ASSEMBLY 
  3. INSTALL TRANSMITTER HOUSING COVER 
    1. Install the cover.
      NOTE: If the screws are loose, it may cause faulty contact between the battery (lithium battery) and the terminals.
scientia non olet · About LEMON Manuals