Service Data
WARNING: This page is about a different variant/trim than selected.
SUSPENSION SERVICE DATA
| Front wheel alignment | Vehicle height | ||
| 2WD | Front: A-B Rear: C-D |
109.4 mm (4.31 in.) 30.5 mm (1.20 in.) |
|
| 4WD | Front: A-B Rear: C-D |
108.4 mm (4.27 in.) 22.3 mm (0.88 in.) |
|
| Front wheel alignment | Toe-in (total) Rack end length difference | 0 +- 2 mm (0 +- 0.08 in.) 1.5 mm (0.059 in.) or less |
|
| Wheel angle | |||
| 2WD | Inside wheel Outside wheel: Reference |
35°41' +- 2° (35.68° +- 2°) 31°22' (31.37°) |
|
| 4WD | Inside wheel Outside wheel: Reference |
35°41' +- 2° (35.68° +- 2°) 31°22' (31.37°) |
|
| Front wheel alignment | Camber | 2WD: | -0°35' +- 45' (-0.58° +- 0.75°) |
| 4WD: | -0°35' +- 45' (-0.58° +- 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Caster | 2WD: | 2°45' +- 45' (2.75° +- 0.75°) | |
| 4WD: | 2°30' +- 45' (2.50° +- 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Steering axis inclination | 2WD: | 10°35' +- 45' (10.58° +- 0.75°) | |
| 4WD: | 10°35' +- 45' (10.58° +- 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Front suspension | Lower ball joint turning torque | 3.5 N.m (36 kgf.cm, 31 in.*ibf) or less | |
| Stabilizer bar link ball joint turning | torque 2.0 N.m (20 kgf.cm, 18in.*ibf) or less | ||
A: Ground clearance of front wheel center
B: Ground clearance of lower suspension arm No.2 bush set bolt center
C: Ground clearance of rear wheel center
D: Ground clearance of strut rod set bolt center
SUSPENSION SERVICE DATA
| Rear wheel alignment | Toe-in (total) | 3 +- 2 mm (0.12 +- 0.08 in.) |
| Camber | ||
| 2WD | -1°10' +- 45' (-1.17° +- 0.75°) | |
| 4WD | -0°40' +- 45' (-0.67° +- 0.75°) | |
| Right-left error | 45' (0.75°) or less | |
| Rear Suspension | Stabilizer link ball joint turning torque | 1.0 N.m (10 kgf.cm, 8.9 in.lbf) or less |