LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2006 >> Camry Solara SLE, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Lighting System) >> Height Control Sensor >> Installation

Height Control Sensor: Installation

WARNING: This page is about a different car, the 2006 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL HEIGHT CONTROL SENSOR SUBASSEMBLY REAR RH 
    1. Install the height control sensor link rear RH with the 2 nuts.

      Torque: 8.0 N*m (81 kgf*cm, 71 in.*lbf) 

    2. Align the matchmarks with the one on the height control sensor sub-assembly rear RH and bracket.
    3. Install the height control sensor sub-assembly rear RH.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    4. Connect the connector.
    5. Install a nut.
    6. When the work like the vehicle height may be changed is performed, for example, removal and installation of the height control sensor, or replacement of the suspension, etc., initialize the sensor, then adjust the optical axis (See INITIALIZATION ).
  2. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT (See  ADJUSTMENT  ) 
  3. PREPARATION FOR HEADLIGHT AIMING (Using a tester) (See  ADJUSTMENT  ) 
  4. PREPARATION FOR HEADLIGHT AIMING (Using a screen) (See  ADJUSTMENT  ) 
  5. HEADLIGHT AIMING INSPECTION (See  ADJUSTMENT  ) 
  6. HEADLIGHT AIMING ADJUSTMENT (See  ADJUSTMENT  ) 
scientia non olet · About LEMON Manuals