Torque Specifications
WARNING: This page is about a different car, the 2006 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
2GR-FE
TIGHTENING TORQUE SPECIFICATIONS - 2GR-FE
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Cylinder block drain cock plug x Drain cock | 13 | 130 | 10 | |
| Water pump assembly x Cylinder block |
A bolt | 21 | 214 | 15 |
| B, C bolt | 9.1 | 93 | 81 in.*lbf | |
| Water pump pulley x Cylinder block | 10 | 102 | 7 | |
| Idler pulley sub-assembly No.2 x Cylinder block | 43 | 438 | 32 | |
| Water inlet housing x Cylinder block | 10 | 102 | 7 | |
| Water inlet x Water inlet housing | 10 | 102 | 7 | |
| Radiator support upper x Body | 7.0 | 71 | 62 in.*lbf | |
| hood lock assembly x Body | 8.0 | 82 | 71 in.*lbf | |
| Air cleaner inlet No.1 x Body | 5.0 | 51 | 44 in.*lbf | |
| Air cleaner inlet No.2 x Body | 5.0 | 51 | 44 in.*lbf | |
| Oil cooler assembly x Radiator tank lower | 8.3 | 85 | 74 in.*lbf | |
| Oil cooler pipe x Oil cooler assembly | 15 | 150 | 11 | |
| Condenser assembly x Radiator assembly | 5.4 | 55 | 48 in.*lbf | |