Cruise Control Main Switch: Removal

HINT:

Installation is in the reverse order of removal.

1. DISCONNECT BATTERY NEGATIVE TERMINAL 
   1. Wait for 90 seconds after disconnecting the cable to prevent the airbag working (PRECAUTION ).
2. REMOVE STEERING WHEEL COVER LOWER NO. 2 (See  REMOVAL  ) 
3. REMOVE STEERING WHEEL COVER LOWER NO. 3 (See  REMOVAL  ) 
4. REMOVE HORN BUTTON ASSEMBLY (See  REMOVAL  ) 
5. REMOVE CRUISE CONTROL MAIN SWITCH 
   1. Disconnect the connector.
      Fig 1: Disconnecting Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the 2 screws and cruise control main switch.
      Fig 2: Removing Cruise Control Main Switch

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002