Front Shock Absorber With Coil Spring: Disposal

HINT:

Dispose the RH side by the same procedures with the LH side.

1. DISPOSE OF SHOCK ABSORBER ASSY FRONT LH 
   1. Fully extend the shock absorber rod.
   2. Using a drill, make a hole in the cylinder as shown in the illustration to discharge the gas inside.
      CAUTION:

      • When drilling, chips may fly out, work carefully.
      • The gas is colorless, odorless and non-poisonous.
      Fig 1: Disposing Of Shock Absorber Assy Front LH

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002