How To Proceed With Troubleshooting

HINT:

Troubleshoot in accordance with the procedures in the following information.

1. VEHICLE BROUGHT TO WORKSHOP 

   Go to next step

2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK (See  CUSTOMER PROBLEM ANALYSIS CHECK  ) 

   Go to next step

3. DIAGNOSTIC TROUBLE CODE CHECK (See  DIAGNOSTIC TROUBLE CODE CHART  ) 
   1. Check the diagnostic trouble code.
      1. Without code outputs, proceed to A.
      2. With code outputs, proceed to B.

   B: Go to step 6 

   A: Go to Next Step 

4. PROBLEM SYMPTOMS TABLE (See  PROBLEM SYMPTOMS TABLE  ) 
   1. Without applicable symptoms, proceed to A.
   2. With applicable symptoms, proceed to B.

   B: Go to step 6 

   A: Go to Next Step 

5. PERFORM TROUBLESHOOTING IN FOLLOWING METHOD, DEPENDING ON MALFUNCTION SYMPTOM 
   1. On-vehicle Inspection (See ON-VEHICLE INSPECTION ).
   2. Inspection (See INSPECTION ).
   3. Terminals of ECU (See TERMINALS OF ECU ).
6. ADJUSTMENT, REPAIR OR REPLACEMENT 

   END