Front Shock Absorber With Coil Spring: Disposal

HINT:

Dispose the RH side following the same procedures as with the LH side.

1. DISPOSE OF FRONT SHOCK ABSORBER 
   1. Fully extend the shock absorber rod.
      Fig 1: Identifying Distance Between A And B Of Cylinder

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Using a drill, make a hole in the cylinder between A and B as shown in Fig 1 to discharge the gas inside.
      CAUTION:

      • Be careful when drilling because shreds of metal may fly about, so always use the proper safety equipment.
      • The gas is colorless, odorless and nonpoisonous.