Torque Specifications
WARNING: This page is about a different car, the 2006 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
2AZ-FE LUBRICATION TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Oil pressure switch at Cylinder head | 15 | 152 | 11 | |
| Oil drain plug at Oil pan sub-assembly | 25 | 255 | 18 | |
| Oil pump assembly at Cylinder block | 19 | 194 | 14 | |
| Chain tensioner plate at Stiffening crankcase assembly | 12 | 122 | 9 | |
| Oil pump drive sprocket at Oil pump | 30 | 301 | 22 | |
| Chain vibration damper No.1 at Cylinder block | 9.0 | 92 | 80 in.*lbf | |
| Chain tensioner slipper at Cylinder block | 19 | 194 | 14 | |
| Timing chain cover | Bolt A | 9.0 | 92 | 80 in.*lbf |
| Bolt B | 21 | 214 | 15 | |
| Bolt C | 43 | 438 | 32 | |
| Nut | 9.0 | 92 | 80 in.*lbf | |
| V-ribbed belt tensioner assembly at Timing chain cover | 59.5 | 607 | 44 | |
| Engine mounting bracket RH at Cylinder block | 54 | 551 | 40 | |
| Engine mounting insulator RH | Bolt A | 95 | 969 | 70 |
| Bolt B | 87 | 888 | 64 | |
| Steering gear return hose clamp | 8.0 | 80 | 69 in.*lbf | |
| Engine mounting insulator FR at Engine mounting bracket FR | 87 | 888 | 64 | |
| Engine lateral control rod at Bracket | 89 | 910 | 66 | |
| Oil pan sub-assembly at Stiffening crankcase assembly | 9.0 | 92 | 80 in.*lbf | |
| Crankshaft position sensor at Timing chain cover | 9.0 | 92 | 80 in.*lbf | |
| Crankshaft pulley at Crankshaft | 170 | 1,733 | 125 | |
| Ignition coil assembly at Cylinder head | 9.0 | 92 | 80 in.*lbf | |
| Engine mounting bracket No.2 RH at Timing chain cover | 52 | 531 | 38 | |
| Engine mounting stay No.2 RH at Cylinder head | 64 | 653 | 47 | |
| Engine moving control rod w/bracket at Fender apron RH | 64 | 653 | 47 | |
| Oil pump cover at Oil pump | 8.8 | 90 | 78 in.*lbf | |
| Oil pump strainer at Oil pump | 8.8 | 90 | 78 in.*lbf | |