Transfer System: Precaution

When working with FIPG material, you must observe the following: 

• Using a razor blade and gasket scraper, remove all the old packing (FIPG) material from gasket surfaces. 
• Thoroughly clean all components to remove any loose material. 
• Clean both sealing surfaces with a non-residue solvent. 
• Apply FIPG in approx, a 1 mm (0.04 in.) wide bead along the sealing surface. 
• Parts must be assembled within 10 minutes of FIPG application. Otherwise, the packing material must be removed and reapplied.