Service Data
Front Suspension Service Data
| Front wheel alignment | Vehicle height | ||
| FF | Front: A - B | 114 mm (4.48 in.) | |
| Rear: D - C | -18 mm (-0.7 in.) | ||
| 4WD | Front: A - B | 116 mm (4.57 in.) | |
| Rear: D - C | -53.5 mm (-21 in.) | ||
| Toe-in (total) | 0° ± 12' (0° ± 0.2°) 0 ± 2 mm (0 ± 0.08 in.) | ||
| Rack end length difference | 1.5 mm (0.059 in.) or less | ||
| Wheel angle | |||
| FF | Inside wheel | 42°45' ± 2° (42.75° ± 2°) | |
| Outside wheel: Reference | 36°21' (36.35°) | ||
| 4WD | Inside wheel | 42°42' ± 2° (42.70° ± 2°) | |
| Outside wheel: Reference | 36° 16' (36.27°) | ||
| Camber | -0°17' ± 45' (-0.28° ± 0.75°) | ||
| Right-left error | 30' (0.5°) or less | ||
| Caster | FF: | 2°48' ± 45' (2.80° ± 0.75°) | |
| 4WD: | 2°40' ± 45' (2.67° ± 0.75°) | ||
| Right-left error | 30' (0.5°) or less | ||
| Steering axis inclination | FF: | 10°25' ± 45' (10.42° ± 0.75°) | |
| 4WD: | 10° 12' ±45' (10.02° ± 0.75°) | ||
| Right-left error | 30' (0.5°) or less | ||
| Front suspension | Lower ball joint turning torque | 0.98 -- 3.43 N.m (10 -- 35 kgf.cm, 8.7 -- 30 in.lbf) | |
| Stabilizer bar link ball joint turning torque | 0.05 -- 1.96 Nm (0.5 -- 20 kgf.cm, 0.4 -- 17.4 in.lbf) | ||
- A: Ground clearance of front wheel center
- B: Ground clearance of lower suspension arm No. 2 set bolt center
- C: Ground clearance of rear axle carrier bush set bolt center
- D: Ground clearance of rear wheel center