LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> Sienna LE, AWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> Dismounting/Mounting Procedures

Dismounting/Mounting Procedures

NOTE: This vehicle IS NOT  equipped with tire pressure sensors mounted on the wheels.
CAUTION: The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
NOTE: Installed tires should be of the specified size. They should be of the same size and construction. If tires other than the specified size are used, or if tires of different sizes or constructions are mixed, the tire pressure warning system will not function properly.
NOTE: This system requires initializing after changing tires or wheels, after rotating the tires, or when tire pressure warning light blinks twice every second. See INITIALIZING TIRE PRESSURE MONITOR SYSTEM  under RESET PROCEDURES.
NOTE: If the negative battery terminal is disconnected, initialize the following systems after the terminal is reconnected: power window, power sliding door, power back door and moon roof. Refer to owner's manual or appropriate manufacturer service information.
scientia non olet · About LEMON Manuals