Service Data
DRIVE SHAFT/PROPELLER SHAFT/AXLE SERVICE DATA
| Propeller shaft runout | Max. | 0.8 mm (0.031 in.) |
| Intermediate shaft runout | Max. | 0.8 mm (0.031 in.) |
| Intermediate shaft front flange runout | Max. | 0.1 mm (0.004 in.) |
| Intermediate shaft rear flange runout (horizontal direction) | Max. | 0.1 mm (0.004 in.) |
| Intermediate shaft rear flange runout (vertical direction) | Max. | 0.1 mm (0.004 in.) |
| Front axle hub bearing | Backlash | Maximum: 0.05 mm (0.0020 in.) |
| Front axle hub bearing | Deviation | Maximum: 0.05 mm (0.0020 in.) |
| Rear axle hub bearing | Backlash | Maximum: 0.05 mm (0.0020 in.) |
| Rear axle hub bearing | Deviation | Maximum: 0.07 mm (0.0027 in.) |