Typical Malfunction Thresholds
TYPICAL MALFUNCTION THRESHOLDS SPECIFICATION
| Either of the following conditions is met: | Condition 1 or 2 |
| 1. Frequency that both of the following conditions (a) and (b) are met: | 5 times or more |
| (a) Engine RPM - target engine RPM | Less than - 100 RPM, or more than 150 RPM |
| (b) Vehicle condition | Stop after vehicle was driven at 10 km/h (6.25 mph) or more |
| 2. Frequency that both of the following conditions (a) and (b) are met: | Once |
| (a) Engine RPM - target engine RPM | Less than - 100 RPM, or more than 150 RPM |
| (b) ISC flow rate learning value | 1.3 L/sec or less, or 9.03 L/sec or more |