Ultrasonic Sensor No.2: Replacement

HINT:

See COMPONENTS 

1. REMOVE REAR BUMPER COVER (See  REPLACEMENT  ) 
2. REMOVE ULTRASONIC SENSOR RETAINER NO.1 
   1. Remove the ultrasonic sensor retainer No.1 as shown.
   Fig 1: Removing Ultrasonic Sensor Retainer No.1

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. REMOVE ULTRASONIC SENSOR NO.2 
   1. Disconnect connector and remove the ultrasonic sensor No.2.
   Fig 2: Removing Ultrasonic Sensor No.2

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. INSTALL REAR BUMPER COVER (See  REPLACEMENT  )