Ultrasonic Sensor No.1: Replacement

HINT:

See COMPONENTS 

1. REMOVE FRONT FENDER LINER LH (See  REPLACEMENT  ) 
2. REMOVE FRONT FENDER LINER RH (See  REPLACEMENT  ) 
3. REMOVE FRONT BUMPER COVER (See  REPLACEMENT  ) 
4. REMOVE REAR BUMPER COVER (See  REPLACEMENT  ) 
5. REMOVE ULTRASONIC SENSOR RETAINER NO.1 
   1. Remove the ultrasonic sensor retainer No.1 as shown.
   Fig 1: Disconnecting Connector

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. REMOVE ULTRASONIC SENSOR NO. 
   1. Disconnect the connector and remove the ultrasonic sensor No.1.
   Fig 2: Removing Ultrasonic Sensor No.1

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
7. INSTALL REAR BUMPER COVER (See  REPLACEMENT  ) 
8. INSTALL FRONT BUMPER COVER (See  REPLACEMENT  ) 
9. INSTALL FRONT FENDER LINER LH (See  REPLACEMENT  ) 
10. INSTALL FRONT FENDER LINER RH (See  REPLACEMENT  )