Front Shock Absorber With Coil Spring: Disposal

HINT:

Dispose the RH side by the same procedures as the LH side.

1. DISPOSE OF SHOCK ABSORBER ASSY FRONT LH 
   1. Fully extend the shock absorber rod.
   2. Using a drill, make a hole in the cylinder as shown in Fig 1 to discharge the gas inside.
   CAUTION:

   • When drilling, chips may fly out, work carefully.
   • The gas is colorless, odorless and non-poisonous.
   Fig 1: Identifying Shock Absorber Rod

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002