System Description
- METER GAUGE AND WARNING/INDICATOR
GAUGE:
GAUGE SPECIFICATIONSItem Detail Speedometer Vehicle speed sensor (Direct line). Tachometer ECM transmits engine speed to the meter to display. ODO/TRIP Meter Combination meter assy. Fuel Displays a fuel level according to a signal from the fuel sender gauge (Direct line). Water Temperature Displays engine coolant temperature according to a signal from the ECM (BEAN). Oil Pressure Receives a signal from the oil pressure sender (Direct line). Volt Meter Displays vehicle voltage according to a voltage from the IG terminal (Direct line). WARNING/INDICATOR:
HINT:
Combination meter bulb check is performed for 3 seconds after the ignition switch is turned ON.
BUZZER:
BUZZER SPECIFICATIONSItem Detail Key Reminder Buzzer is ON: Ignition switch is OFF, key is inserted, and door is open. Fasten Belt Buzzer is ON: Ignition switch is ON and seat belt is unfastened. - COMBINATION METER IN SEQUOIA HAS THE FOLLOWING FEATURES:
- Built-in buzzer for the reminder system (key and seat belt)
- Integrated trip and odometer knobs
- Press and release knob to scroll through trip "A", trip "B", and odometer features.
- Press and hold the trip knob to reset trip meter functions.
- Oil maintenance indicator
- When 4,500 miles have been traveled, after the ODO/TRIP switch is set, the maintenance indicator begins to blink for 15 seconds after the ignition switch is turned to the ON position.
- When 5,000 miles have been traveled, after the ODO/TRIP switch is set, the maintenance indicator comes on.
- Press and hold the trip knob to reset the oil maintenance indicator.
- Rotate knob to adjust interior illumination