Diagnostic Trouble Code Chart
If a DTC is displayed during the DTC check, check the circuit listed for that code in Fig 1 below and proceed to appropriate "CIRCUIT INSPECTION". Refer to DIAGNOSTIC TROUBLE CODES (DTC) LIST
HINT:
- *1 : (Black Circle) - MIL illuminates.
- *2 : (Circle) - Means that the ECM memorizes the malfunction code if the ECM detects the DTC detection condition.
- *3 : Except Mexico.
- This DTC may be output when the clutch, brake, and gear components, etc. inside the automatic transaxle are damaged.
DIAGNOSTIC TROUBLE CODES (DTC) LIST
| DTC | Description |
|---|---|
| DTC P0500 | Vehicle Speed Sensor "A" |
| DTC P0705 | Transmission Range Sensor Circuit Malfunction (PRNDL Input) |
| DTC P0710, P0712, P0713 | Transmission Fluid Temperature Sensor "A" Circuit Low/High Input |
| DTC P0711 | Transmission Fluid Temperature Sensor "A" Performance |
| DTC P0717 | Turbine Speed Sensor Circuit No Signal |
| DTC P0724 | Brake Switch "B" Circuit High |
| DTC P0741 | Torque Converter Clutch Solenoid Performance (Shift Solenoid Valve DSL) |
| DTC P0746, P0766, P0776 | Pressure Control Solenoid "A, B & D" Performance (Shift Solenoid Valve SL1/S4/SL2) |
| DTC P0748, P0778, P0982, P0983 | Pressure Control Solenoid "A & D" Electrical Low/High |
| DTC P0793 | Intermediate Shaft Speed Sensor "A" |
| DTC P2716 | Pressure Control Solenoid "D" Electrical |
| DTC P2769, P277 | Torque Converter Clutch Solenoid Circuit Low/High (Shift Solenoid Valve DSL) |