Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever the following DTCs are not present | None |
Automatic Transmission:
TYPICAL ENABLING CONDITIONS (AUTOMATIC TRANSMISSION)
| Countergear speed | 300 rpm or more |
| Engine condition | Running |
| Either of the following conditions A and B is met: | |
| Conditions A: | |
| Time after PNP switch ON to OFF | 2 sec. or more |
| ECT and ECT sensor | ECT is 20°C (68°F) or more and ECT sensor does not malfunction (P0115 or P0116) |
| Conditions B: | |
| Time after PNP switch ON to OFF | 30 sec. or more |
| ECT and ECT sensor | ECT is less than 20°C (68°F) or ECT sensor malfunction (P0115 or P0116) |
| Time after ignition switch ON | 3 sec. or more |
Manual Transmission:
TYPICAL ENABLING CONDITIONS (MANUAL TRANSMISSION)
| ECT | 70°C (158°F) or more |
| Engine RPM | 2,000 to 5,000 rpm |
| Intake air amount per revolution | 0.55 g/rev or more |