LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> RAV4 Base, FWD, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Front Seat >> Front Seat Assembly >> Removal

Front Seat Assembly: Removal

CAUTION:
  • Wear safety gloves, because the cutting surface of the seatback frame and seat adjuster may injure your hand.
  • Work must be started at least 90 seconds after the ignition switch is turned to the LOCK position and the negative (-) terminal cable is disconnected from the battery.

    (The SRS is equipped with a back-up power source. If work is started within 90 seconds after disconnecting the negative (-) terminal cable of the battery, the SRS may deploy.)

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

Remove the 4 bolts and front seat.

NOTE: Be careful not to damage the body.
scientia non olet · About LEMON Manuals