On-Vehicle Inspection

TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY 

1. Tighten the bolts and nuts on the chassis parts listed below, if necessary.
   • Front axle and suspension
   • Drive train
   • Rear axle and suspension
   • Brake system
   • Engine mounting
   • Other chassis parts
2. Tighten the bolts and nuts on the body parts listed below, if necessary.
   • Seat belt system
   • Seats
   • Doors and hood
   • Body mountings
   • Fuel tank
   • Exhaust pipe system
   • Other body parts

1. Remove the glove compartment assembly.
2. Remove the filter case from the filter outlet.
3. Remove the filter from the filter case.
4. Replace the filter with a new one.
5. The installation procedures are the removal procedures in reverse order.