Dismounting/Mounting Procedures
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
NOTE:
Installed tires should be of the specified size. They should be of the same size and construction. If tires other than the specified size are used, or if tires of different sizes or constructions are mixed, the tire pressure warning system will not function properly.
NOTE:
This system requires initializing after changing tires or wheels, after rotating the tires, or if warning light blinks once every 3 seconds. See RESET PROCEDURES .
NOTE:
This vehicle IS NOT
equipped with tire pressure sensors mounted on the wheels.