How To Proceed With Troubleshooting

HINT:

Use these procedures to troubleshoot the power door lock control system.

1. VEHICLE BROUGHT TO WORKSHOP 

   NEXT: Go To Next Step 

2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK (See  CUSTOMER PROBLEM ANALYSIS CHECK  ) 

   NEXT: Go To Next Step 

3. PROBLEM SYMPTOMS TABLE (See  PROBLEM SYMPTOMS TABLE  ) 
   1. If the fault is not listed on the problem symptoms table, proceed to  A.
   2. If the fault is listed on the problem symptoms table, proceed to  B.
   1. B Go to step   5 
   2. A: Go To Next Step
4. PERFORM TROUBLESHOOTING IN THE FOLLOWING METHOD, DEPENDING ON MALFUNCTION SYMPTOM 
   1. Terminals of ECU (see TERMINALS OF ECU )
   2. Inspection (see INSPECTION )
   3. On-vehicle inspection (see POWER DOOR LOCK CONTROL SYSTEM )
5. ADJUSTMENT, REPAIR OR REPLACEMENT 

   NEXT: Go To Next Step 

   END