LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> MR2 C65M >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension And Axle >> Front Shock Absorber >> Disposal

Front Shock Absorber: Disposal

  1. FULLY EXTEND SHOCK ABSORBER ROD 
    Fig 1: Discharging Cylinder Gas Using A Drill
    G02631769Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. DRILL HOLE TO DISCHARGE GAS FROM CYLINDER 

    Using a drill, make a hole in the cylinder as shown in the illustration to discharge the gas inside.

    CAUTION:
    • When drilling, chips may fly out, work carefully.
    • The gas is colorless, odorless and non-poisonous.
scientia non olet · About LEMON Manuals