Typical Enabling Conditions
TYPICAL ENABLING CONDITIONS SPECIFICATION TABLE
| The monitor will run whenever the following DTCs are not present | See "List of disable a monitor" (in PRE-CHECK ) |
| Accumulated time with all of the following condition | 30 seconds or more |
| Battery voltage | 11 V or more |
| Intake air temperature | -10°C (14°F) or more |
| Idling | OFF |
| Intake air amount | 5 g/sec or more, and less than 30 g/sec |
| Engine coolant temperature | 75°C (167°F) or more |
| Estimated upstream catalyst temperature | 440°C (878°F) or more, and 870°C (1,382°F) or less |
| Estimated temperature of downstream catalyst | 320°C (608°F) or more, and 690°C (1,274°F) or less |
| Fuel system status | Closed loop |