Service Data
Front Suspension System Service Data Specifications
| Front wheel alignmwnt | Vehicle height | ||
| FF | Front: A - B: | 120.1 mm (4.73 in.) | |
| Rear: D - C: | 40.5 mm (1.59 in.) | ||
| 4WD | Front: A - B: | 110.1 mm (4.33 in.) | |
| Rear: D - C: | 30.5 mm (1.20 in.) | ||
| Toe-in (total) | 0° ± 10' (0° ± 0.16°, 0 ± 2 mm, 0 ± 0.08 in.) | ||
| Rack end length difference | 1.5 mm (0.059 in.) or less | ||
| Wheel angle | |||
| FF | Inside wheel: | 35°28' ± 2° (35.47° ± 2°) | |
| Outside wheel: Reference: | 31° 13' (31.22°) | ||
| 4WD | Inside wheel: | 35°41' ± 2' (35.68° ± 2°) | |
| Outside wheel: Reference: | 31°22' (31.37°) | ||
| Camber | |||
| FF: | -0°40' ± 45' (-0.67° ± 0.75°) | ||
| 4WD: | -0°35' ± 45' (-0.58° ± 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Caster | 2°45' ± 45' (2.75° ± 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Steering axis inclination | |||
| FF: | 10°45' ± 45' (10.75° ± 0.75°) | ||
| 4WD: | 10°35' ± 45' (10.58° ± 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Front suspension | Lower ball joint turning torque | 0.98 to 3.43 N.m (10 to 35 kgf.cm, 8.7 to 30 in..lbf) | |
| Stabilizer bar link ball joint turning torque | 0.05 to 1.96 N.m (0.5 to 20 kgf.cm, 0.4 to 17.4 in..lbf) | ||
A: Ground clearance of front wheel center
B: Ground clearance of lower suspension arm No. 2 set bolt center
C: Ground clearance of strut rod set bolt center
D: Ground clearance of rear wheel center