Torque Specifications
2AZ-FE
LUBRICATION SYSTEM TORQUE SPECIFICATIONS (2AZ-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Oil pressure switch at Cylinder head | 15 | 153 | 11 |
| Oil pump at Cylinder block | 19 | 194 | 14 |
| Oil pump at Oil pump cover | 8.8 | 90 | 79 in.lbf |
| Oil pump at Oil pump strainer | 8.8 | 90 | 79 in.lbf |
| Oil cooler at Union | 79 | 800 | 58 |
| Oil cooler at Cylinder block | 9.0 | 92 | 80 in.lbf |
| Oil filter at Cylinder block | 17.5 | 178 | 13 |
| Oil drain plug at Oil pan sub-assy | 25 | 255 | 18 |
| Oil pump driven shaft sprocket at Oil pump assy | 30 | 306 | 22 |
| Chain tensioner plate at cylinder block | 12 | 122 | 9.0 |
| Chain vibration damper No. 1 at Cylinder block | 9.0 | 92 | 80 in.lbf |
| Engine mounting bracket RH at Cylinder block | 54 | 551 | 40 |
| Engine mounting insulator RH at Engine mounting bracket RH Nut A | 95 | 964 | 70 |
| Engine mounting insulator RH at Engine mounting bracket RH Nut B | 87 | 887 | 64 |
| Engine mounting insulator FR at Engine mounting insulator bracket | 87 | 887 | 64 |
| Oil pan sub-assy at Stiffening crankcase assy | 9.0 | 92 | 80 in.lbf |
3MZ-FE
LUBRICATION SYSTEM TORQUE SPECIFICATIONS (3MZ-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Engine drain plug at Oil pan sub-assy | 45 | 459 | 33 |
| Oil pressure switch at Cylinder block | 15 | 153 | 11 |
| Oil pump rotor set at Oil pump assembly | 10 | 105 | 8.0 |
| Oil pump relief valve at Oil pump housing | 49 | 500 | 36 |
| Oil pump cover at Oil pump housing | 10 | 102 | 7.0 |
| Oil pump assembly at Cylinder block Bolt A | 8.0 | 82 | 71 in.lbf |
| Oil pump assembly at Cylinder block Bolt B | 20 | 199 | 14 |
| Oil pump assembly at Cylinder block Bolt C | 43 | 438 | 32 |
| Crank position sensor at Oil pump assembly | 8.0 | 82 | 71 in.lbf |
| Oil pan sub-assembly at Cylinder block 10 mm head | 8.0 | 82 | 71 in.lbf |
| Oil pan sub-assembly at Cylinder block 12 mm head | 20 | 204 | 15 |
| Oil strainer at Main bearing cap | 8.0 | 82 | 71 in.lbf |
| Oil pan sub-assembly No. 2 at Oil pan sub-assembly No. 1 | 8.0 | 82 | 71 in.lbf |
| Transverse engine mounting bracket at Cylinder block Bolt A | 54 | 551 | 40 |
| Transverse engine mounting bracket at Cylinder block Nut B | 54 | 551 | 40 |
| Transverse engine mounting bracket at PS pump bracket Bolt C | 43 | 438 | 32 |
| Engine mounting insulator RH at Engine mounting bracket Nut A | 95 | 969 | 70 |
| Engine mounting insulator RH at Front frame Nut B | 87 | 887 | 64 |
| Engine mounting insulator FR at Engine mounting insulator bracket Bolt A | 87 | 887 | 64 |
| Engine mounting insulator FR at Front frame Nut B | 52 | 530 | 38 |
| Engine moving control rod at body | 64 | 653 | 47 |
| Compressor mounting bracket No. 1 at Cylinder block | 25 | 255 | 18 |
| Timing belt idler sub-assembly No. 1 at Cylinder block | 34 | 347 | 25 |
| Timing belt idler sub-assembly No. 2 at Cylinder block | 43 | 438 | 32 |
| Compressor and magnetic clutch at Compressor mounting bracket | 25 | 255 | 18 |