LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> Highlander Limited, FWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch >> Inspection

Ignition Switch: Inspection

Fig 1: Identifying Ignition Switch Connector Terminals
G02580628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  1. INSPECT IGNITION OR STARTER SWITCH ASSY 
    1. Inspect the ignition switch continuity.
      IGNITION SWITCH CONTINUITY CHECK

      Switch position Tester connection Specified condition
      LOCK - No continuity
      ACC 1 - 3 Continuity
      ON 1 - 2 - 3 5 - 6 Continuity
      START 1 - 2 4 - 5 - 6 Continuity

      If the continuity is not as specified, replace the ignition switch.

scientia non olet · About LEMON Manuals