Torque Specifications
2AZ-FE
STARTING & CHARGING SYSTEM TORQUE SPECIFICATIONS (2AZ-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Starter assy | |||
| Starter assy at Engine | 37 | 377 | 27 |
| Starter wire at Terminal 30 of starter | 9.8 | 100 | 7.0 |
| Starter drive housing assy at Magnet switch assy | 7.5 | 76 | 66 in.lbf |
| Starter commutator end frame assy at Starter drive housing assy | 6.0 | 61 | 53 in.lbf |
| Lead wire of starter yoke at Terminal C of magnet switch assy | 10 | 102 | 7.0 |
| Battery clamp at Battery clamp bolt | 5.5 | 56 | 49 in.lbf |
| Cable at Battery terminal | 3.5 | 36 | 31 in.lbf |
| Generator assy (100A) | |||
| Generator assy at Engine M8 | 21 | 214 | 15 |
| Generator assy at Engine M10 | 52 | 530 | 38 |
| Generator wire at Generator assy | 9.8 | 100 | 7.0 |
| Generator rectifier end frame at Drive end frame assy | 5.8 | 59 | 51 in.lbf |
| Generator brush holder assy at Generator rectifier end frame | 1.8 | 18 | 16 in.lbf |
| Generator rear end cover at Generator rectifier end frame | 4.6 | 47 | 41 in.lbf |
| Retainer plate at Drive end frame assy generator | 2.3 | 23 | 20 in.lbf |
| Generator pulley at Generator rotor assy | 110 | 1,122 | 81 |
| Generator assy (130A) | |||
| Generator assy at Engine M8 | 21 | 214 | 15 |
| Generator assy at Engine M10 | 52 | 530 | 38 |
| Generator wire at Generator assy | 9.8 | 100 | 7.0 |
| Generator rectifier end frame at Drive end frame assy | 5.8 | 59 | 51 in.lbf |
| Generator brush holder assy at Generator rectifier end frame | 1.8 | 18 | 16 in.lbf |
| Generator rear end cover at Generator rectifier end frame | 4.6 | 47 | 41 in.lbf |
| Retainer plate at Drive end frame assy generator | 2.3 | 23 | 20 in.lbf |
| Generator pulley at Generator rotor assy | 110 | 1,122 | 81 |
3MZ-FE
STARTING & CHARGING SYSTEM TORQUE SPECIFICATIONS (3MZ-FE)
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Starter assy | |||
| Starter assy at Engine | 37 | 377 | 27 |
| Starter wire at Terminal 30 of starter | 9.8 | 100 | 7.0 |
| Starter drive housing assy at Magnet switch assy | 7.5 | 76 | 66 in.lbf |
| Starter commutator end frame assy at Starter drive housing assy | 6.0 | 61 | 53 in.lbf |
| Lead wire of starter yoke at Terminal C of magnet switch assy | 10 | 102 | 7.0 |
| Battery clamp at Battery clamp bolt | 5.5 | 56 | 49 in.lbf |
| Cable at Battery terminal | 3.5 | 36 | 31 in.lbf |
| Generator assy (100A) | |||
| Generator assy at Generator bracket No. 2 | 58 | 592 | 43 |
| Generator assy at Generator belt adjusting bar | 18 | 184 | 13 |
| Generator wire at Generator assy | 9.8 | 100 | 7.0 |
| Generator rectifier end frame at Drive end frame assy | 5.8 | 59 | 51 in.lbf |
| Generator brush holder assy at Generator rectifier end frame | 1.8 | 18 | 16 in.lbf |
| Generator rear end cover at Generator rectifier end frame | 4.6 | 47 | 41 in.lbf |
| Retainer plate at Drive end frame assy generator | 2.3 | 23 | 20 in.lbf |
| Generator pulley at Generator rotor assy | 110 | 1,122 | 81 |
| Generator assy (130A) | |||
| Generator assy at Generator bracket No. 2 | 58 | 592 | 43 |
| Generator assy at Generator belt adjusting bar | 18 | 184 | 13 |
| Generator wire at Generator assy | 9.8 | 100 | 7.0 |
| Generator rectifier end frame at Drive end frame assy | 5.8 | 59 | 51 in.lbf |
| Generator brush holder assy at Generator rectifier end frame | 1.8 | 18 | 16 in.lbf |
| Generator rear end cover at Generator rectifier end frame | 4.6 | 47 | 41 in.lbf |
| Retainer plate at Drive end frame assy generator | 2.3 | 23 | 20 in.lbf |
| Generator pulley at Generator rotor assy | 110 | 1,122 | 81 |