Section 37 (Ignition Switch And Key Unlock Warning Switch): Inspection

WARNING: This page is about a different car, the 2005 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT IGNITION SWITCH CONTINUITY

IGNITION SWITCH CONTINUITY

Switch Position	Tester Connection	Specified Condition
ACC	1 - 3	Continuity
ON	1 - 2 - 3 5 - 6	Continuity
START	1 - 2 4 - 5 - 6	Continuity

If the continuity is not as specified, replace the switch.

Fig 1: Inspecting Ignition Switch Continuity

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY

KEY UNLOCK WARNING SWITCH CONTINUITY

Switch Position	Tester Connection	Specified Condition
OFF (Key removed)	1 - 2	No continuity
ON (Key set)	1 - 2	Continuity

If the continuity is not as specified, replace the switch.

Fig 2: Inspecting Key Unlock Warning Switch Continuity

INSPECT KEY UNLOCK WARNING BUZZER
Check the buzzer sound when the driver's door is opened and the key is inserted.

If operation is not as specified, replace the combination meter (See REMOVAL ).

Fig 3: Inspecting Key Unlock Warning Buzzer
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002