Repair and Diagnosis (Single Page): Maintenance: Procedures: Maintenance: Engine: Inspection

HINT:

Inspect these items when the engine is cold.

1. INSPECT DRIVE BELT (See  ON-VEHICLE INSPECTION  ) 
2. REPLACE SPARK PLUGS (See  ON-VEHICLE INSPECTION  ) 
3. INSPECT AIR FILTER 

   Visually check that the air filter is not excessively dirty or oily.

   HINT:

   Oiliness may indicate a stuck PCV valve.

   If necessary, replace the air cleaner element.

4. REPLACE ENGINE OIL AND OIL FILTER (See  REPLACEMENT  ) 
5. REPLACE ENGINE COOLANT (See  REPLACEMENT  ) 
6. REPLACE GASKET IN FUEL TANK CAP (See  INSPECTION  ) 
7. INSPECT FUEL LINES AND CONNECTIONS (See  INSPECTION  ) 
8. INSPECT EXHAUST PIPES AND MOUNTINGS (See  INSPECTION  ) 
9. ADJUST VALVE CLEARANCE (See  ADJUSTMENT  )