Ignition Switch And Key Unlock Warning Switch: Inspection
- INSPECT IGNITION SWITCH CONTINUITY TESTER CONNECTOR SPECIFIED CONDITION (1 OF 2)
Switch position Tester connection Specified condition LOCK - No continuity ACC 1 - 3 Continuity ON 1 - 2 - 3
5 - 6Continuity START 1 - 2
4 - 5 - 6Continuity If continuity is not as specified, replace the switch.
- INSPECT KEY UNLOCK WARNING SWITCH CONTINUITY TESTER CONNECTOR SPECIFIED CONDITION (2 OF 2
Switch position Tester connection Specified condition OFF (Key removed) - No continuity ON (Key set) 1 - 2 Continuity If continuity is not as specified, replace the switch.
- INSPECT KEY UNLOCK WARNING BUZZER
Check that the buzzer sounds when driver's door is opened and the key is inserted.
If operation is not as specified, replace the combination meter. (See CIRCUIT )