Clock ASSY: Replacement

HINT:

• COMPONENTS: See COMPONENTS .
• Installation is in the reverse order of removal.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (SEE  PRECAUTION  ) 

   Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO.1 (SEE  REPLACEMENT  ) 
3. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO.2 (SEE  REPLACEMENT  ) 
4. REMOVE INSTRUMENT PANEL FINISH PLATE (W/O SMART KEY SYSTEM) (SEE  REPLACEMENT  ) 
5. REMOVE INSTRUMENT PANEL SUB-ASSY (SEE  REPLACEMENT  ) 
6. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY CENTER (SEE  REPLACEMENT  ) 
7. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY (SEE  REPLACEMENT  ) 
8. REMOVE COMBINATION METER ASSY (SEE  REPLACEMENT  ) 
9. REMOVE ACCESSORY METER ASSY (SEE  REPLACEMENT  ) 
10. REMOVE CLOCK ASSY 
    1. Disengage the 4 claws and remove the clock assy.
       Fig 1: Disengage Claws & Remove Clock Assy

       Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
12. PERFORM INITIALIZATION (SEE  INITIALIZATION  ) 

    Some systems need initialization when disconnecting the cable from the negative battery terminal.