Inspection Procedure

CHECK FOR DTCS
1. Delete the DTCs.
2. Check for DTCs again.
HINT:

If the engine does not start, check for DTC B2273, B2275, B2278, B2284, B2285, B2287, B2288 and B2289.

(For details, see the "DTC check and clear" on DTC CHECK/CLEAR .)

OK: No DTC is output.
1. NG: Go to DTC CHART (SEE DIAGNOSTIC TROUBLE CODE CHART )
2. OK : Go to CRANKING HOLDING FUNCTION CIRCUIT (SEE CRANKING HOLDING FUNCTION CIRCUIT )