LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2005 >> 4Runner Limited, 4.7 T, AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition System >> Crank Position Sensor (2UZ-FE) >> Replacement

Crank Position Sensor (2UZ-FE): Replacement

  1. REMOVE ENGINE UNDER COVER ASSY REAR 
  2. REMOVE CRANK POSITION SENSOR 
    1. Disconnect the crank position sensor connector.
    2. Remove the bolt and crankshaft position sensor.
    Fig 1: Removing Crank Position Sensor
    G02579525Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL CRANK POSITION SENSOR 
    1. Install crank position sensor with bolt.

      Torque: 6.5 N.m (65 kgf.cm, 58 in.lbf) 

  4. INSTALL ENGINE UNDER COVER ASSY REAR 
scientia non olet · About LEMON Manuals