LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Tundra SR5, 2D Pickup >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> SFI System (2UZ-FE) >> Fuel Pressure Regulator >> Replacement

Fuel Pressure Regulator: Replacement

  1. REMOVE FUEL PRESSURE REGULATOR 
    1. Disconnect the vacuum hose from intake air resonator.
    2. Disconnect the fuel return hose from the pressure regulator.
      CAUTION: Put a shop towel under the pressure regulator.
    3. Remove the 2 bolts, and pull out the pressure regulator.
    4. Remove the O-ring from the pressure regulator.
    Fig 1: Pulling Out Pressure Regulator
    G04208048Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REINSTALL FUEL PRESSURE REGULATOR 
    1. Apply a light coat of gasoline to a new O-ring, and install it to the pressure regulator.
    2. While turning the pressure regulator left and right, install it to the delivery pipe.
    3. Install the pressure regulator with the 2 bolts.

      Torque: 7.5 N.m (80 kgf-cm, 66 in.lbf) 

    4. Connect the vacuum hose to intake air resonator.
    5. Connect the fuel return hose to the pressure regulator.
  3. CHECK FOR FUEL LEAKS (See  PRECAUTION  ) 
    Fig 2: Turning Pressure Regulator Left And Right
    G04208049Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals