LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2004 >> Tundra Base, Standard >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Systems - Diagnostics >> Circuit Inspection >> Rear Power Window Switch Circuit >> Inspection Procedure

Inspection Procedure

  1. Check power window switch (See  POWER WINDOW CONTROL SYSTEM  ). 
    1. NG: Replace power window switch. 
    2. OK: Go to next step 
  2. Check wire harness and connector between power window switch and body ECU (See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  ). 
    1. NG: Repair or replace wire harness and connector. 
    2. OK: Proceed to next circuit inspection shown on problem symptoms table (See  PROBLEM SYMPTOMS TABLE  ). 
scientia non olet · About LEMON Manuals