Automatic Transmission Unit - 5VZ-FE: Installation

CHECK TORQUE CONVERTER CLUTCH INSTALLATION
Using calipers and a straight edge, measure the distance from the installed surface of the transmission housing to the installed surface of the torque converter clutch.

Correct distance: More than 17.95 mm (0.7067 in.)

Fig 1: Measuring Distance From Installed Surface Of Transmission Housing To Torque Converter Clutch
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TRANSMISSION Installation is in the reverse order of removal (See REMOVAL ).
HINT:
- After installation, adjust the shift lever position (See COLUMN SHIFT ASSEMBLY ).
- Fill ATF and check the fluid level (See SERVICING ).
- Conduct the road test of the vehicle (See PRE-CHECK ).