Inspection Procedure

WARNING: This page is about a different car, the 2006 Toyota Tundra and 2005 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

Check map disc.
CHECK:

Check that the map disc is not deformed or cracked.

OK:

No deformations or cracks appear on the map disc.

Fig 1: Checking Map Disc
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. NG : Replace map disc.
2. OK : Go to next Step.
Set destination.
CHECK:

Set another destination and check if the system can calculate the route correctly.

OK:

Route can be correctly calculated.
1. OK : Normal operation.
2. NG : Proceed to next circuit inspection shown in PROBLEM SYMPTOMS TABLE .