Torque Specification
TRANSFER UNIT TORQUE SPECIFICATIONS
| Part Tightened | N.m | kgf.cm | ft.lbf |
|---|---|---|---|
| Transmission Shift Control Rod at Shift Lever | 13 | 133 | 10 |
| Transmission Shift Lever Assembly | 6.0 | 61 | 53 In.Lbf |
| Engine Rear Mounting at Crossmember | 18 | 185 | 13 |
| Crossmember at Frame | 72 | 734 | 53 |
| Engine Rear Mounting at Transmission | 65 | 660 | 48 |
| Transfer at Transfer Adaptor | 24 | 240 | 17 |
| Vehicle Speed Sensor | 11.5 | 115 | 8 |
| 4Wd Position Switch | 37 | 380 | 27 |
| L4 Position Switch | 37 | 380 | 27 |
| Neutral Position Switch | 37 | 380 | 27 |
| Plug | 37 | 380 | 27 |
| Protector | 18 | 185 | 13 |
| Front Bearing Retainer | 11.5 | 115 | 8 |
| Control Retainer at Front Case | 18 | 185 | 13 |
| Upper Cover at Front Case | 18 | 185 | 13 |
| Companion Flange Lock Nut | 118 | 1,200 | 87 |
| Eattension Housing at Rear Case | 12 | 120 | 9 |
| Front Case at Rear Case | 28 | 285 | 21 |
| Straight Screw Plug For Shift Fork Shaft | 18.6 | 190 | 14 |
| Front Drive Shift Fork (W/ One Touch 2-4 Selector System) | 24 | 240 | 17 |
| Actuator Assembly at Rear Case (W/ One Touch 2-4 Selector System) | 20 | 200 | 14 |
| Separator With Oil Strainer at Front Case | 7.5 | 80 | 69 In.Lbf |
| Oil Pump Body at Front Case | 7.5 | 80 | 69 In.Lbf |
| Straight Screw Plug For Ring Gear | 18.6 | 190 | 14 |
| Relief Valve at Oil Pump Body | 29.4 | 300 | 21 |
| Oil Pump Plate at Oil Pump Body | 7.4 | 75 | 65 In.Lbf |